
Reducer Cylindrical
Two-stage
Ц2-1120 (C2-1120)
Design features
Cylindrical two-stage gearbox of horizontal type.
Application area
Designed to increase torque and reduce speed.
Specifications «Ц2-1120 (C2-1120)»:
Name of parameter | Parameter value |
Gear type | Cylindrical |
Number of transmission stages | Two-stage |
The location of the axes | Parallel |
Gear ratio | 51,0; 39,67; 32,11; 25,81; 41,55; |
Rated torque, N * m | 149000; 151500; 153000; 155000; 157600; |
Total center distance, mm | 1830 |
Weight, kg | 16000 |
Maximum speed of the high-speed shaft, rpm. | 1500 |
Reducers are intended for General industrial use and are used in the mechanisms of load-lifting machines, and can also be used to drive other machines in the range of gear ratios from 10 to 50 in repeated short-term loading modes.
Conditions of application of the reducer:
- rotation of the shafts in both directions;
- climatic conditions Y, T, accommodation category-2, 3 according to GOST 15150;
- non-aggressive environment, moderate dust and humidity;
- the speed of the input shaft is not more than 1500 rpm.
CONSTRUCTION, DIMENSIONS AND CONNECTION DIMENSIONS OF THE GEARBOX
