Phone: +7 (343) 385-29-07
Design features
Horizontal bevel-cylindrical three-stage reducer
Application area
Designed for use in products of lifting and transport equipment, as well as for repair and maintenance needs of existing equipment

Specifications «КЦ2-1300 (KC2-1300)»:

Name of parameter Parameter value
Gear type Conical-cylindrical
Number of transmission stages Three-stage
The location of the axes Cross
Gear ratio 28; 45; 71; 112; 180;
Rated torque, N * m 37500
Total center distance, mm 1300
Weight, kg 5100
Performance 0.91
Nominal radial load on the output shaft, N 75000

Three-stage gearboxes of the KC2 type consist of a pair of conical wheels with a spiral tooth (high-speed stage) and two pairs of cylindrical skew-toothed wheels.
The gear shafts are mounted on rolling bearings mounted in a cast-iron housing. The housing has a connector in the horizontal plane.

Conditions of use:

Designed for use in microclimatic areas with moderate (climatic version Y), as well as dry and humid tropical (T) climate and placement category 2 according to GOST 15150 in the following conditions: constant or variable load, one direction and reverse; constant operation with periodic stops; rotation of shafts in any direction.
KC series gearboxes are designed for continuous continuous operation at 600, 1000, 1500 rpm of the input shaft. When working with other speed numbers, the power of the gearbox is found by interpolation.

CONSTRUCTION, DIMENSIONS AND CONNECTION DIMENSIONS OF THE GEARBOX

Чертеж редуктора КЦ2-1300 (KC2-1300)
Standard sizeAwтAwпAA1BHH1hh1LL1L2L3L4dп
KC2-130080050020207408501282530502403178220022010307903910

Build options:

Варианты сборки редуктора КЦ2-1300 (KC2-1300)

Output shafts are made with a cylindrical end (form C) for all Assembly options, or with a toothed crown on the protruding end of the shaft (form M) - only for Assembly options 41 and 42.

Connecting dimensions of input and output shafts:

the performance of TS – cylindrical:

Цилиндрический вал редуктора КЦ2-1300 (KC2-1300)

gear typeshaft
d
I
b
t
KC2-1300
out
190
350
45
200

version K-conical:

Конический вал редуктора КЦ2-1300 (KC2-1300)

gear typeshaft
d
d1
I
I1
b
t
KC2-1300
in
90
М64х4,0
80
58
5
16

the performance of M – coupler:

Муфтовый вал редуктора КЦ2-1300 (KC2-1300)

gear type
b
d
d1
d2
d3
I
I1
k
engagement
m
z
KC2-1300
40
348
215
180F8
250
605
25
32
6
56