Specifications «КЦ2-500 (KC-500)»:
|Name of parameter||Parameter value|
|Number of transmission stages||Three-stage|
|The location of the axes||Cross|
|Gear ratio||28; 45; 71; 112; 180;|
|Rated torque, N * m||2300|
|Total center distance, mm||500|
|Nominal radial load on the output shaft, N||11500|
Three-stage gearboxes of the KC2 type consist of a pair of conical wheels with a spiral tooth (high-speed stage) and two pairs of cylindrical skewed wheels.
The gear shafts are mounted on rolling bearings mounted in a cast-iron housing. The housing has a connector in the horizontal plane.
Conditions of use:
Designed for use in microclimatic areas with moderate (climatic version Y), as well as dry and humid tropical (T) climate and placement category 2 according to GOST 15150 in the following conditions: constant or variable load, one direction and reverse; constant operation with periodic stops; rotation of shafts in any direction.
KC series gearboxes are designed for continuous continuous operation at 600, 1000, 1500 rpm of the input shaft. When working with other speed numbers, the power of the gearbox is found by interpolation.
CONSTRUCTION, DIMENSIONS AND CONNECTION DIMENSIONS OF THE GEARBOX
Output shafts are made with a cylindrical end (form C) for all Assembly options, or with a toothed crown on the protruding end of the shaft (form M) - only for Assembly options 41 and 42.
Connecting dimensions of input and output shafts:
the performance of C – cylindrical:
the performance of M – coupler: