Phone: +7 (343) 385-29-07
Design features
Gear motors of type 1mpz are designed to work in horizontal and vertical (shaft down) positions with installation on the legs or support flange
Application area
Designed to reduce the speed of rotation and transfer torque to General-purpose machinery (excluding mechanisms for lifting cargo)

Specifications «1МПз2-50 (3МП-50) (1MPz2-50 (3MP-50))»:

Name of parameter Parameter value
Gear type Planetary
Number of transmission stages Two-stage
The location of the axes Coaxial
The output shaft speed, rpm./min. 18; 22.4; 28; 35.5; 45; 56; 71; 90;
Rated torque, N * m 411 - 750
Total center distance, mm 0
Weight, kg 48
Permissible radial cantilever load on the output shaft, N 6420
Performance 0.97
n, rpm
1MPЗ-50
Мкр, Nm
Р, kW
two-stage
18
750
1,5
565
1,1
22,4
750
2,2
620
1,5
28
727
2,2
496
1,5
35,5
750
3
573
2,2
45
617
3
452
2,2
56
661
4
496
3
71
717
5,5
521
4
90
565
5,5
411
4

Conditions for the application of reducers:

  • operation mode-long, with a duration of 8-24 hours/day;
  • the load is constant and variable (within the rated torque) in the same direction and reversible;
  • height above sea level - up to 1000 m;
  • the external environment is non-aggressive, non-explosive with a non-conductive dust content of up to 10 mg / mH
  • climatic version Y-moderate climate, placement category 3-operation in rooms where the temperature and humidity fluctuations are significantly less than in the open air, the operating temperature of the environment from -45°C to +40°C, or T-tropical climate, placement category 2-operation under a canopy or in a room where the temperature and humidity fluctuations are not significantly different from the fluctuations in the open air, the operating temperature of the environment from -10°C to +45°C.

Asynchronous motors of the 4AM series, air series or AI series are used to complete the gear motors. In agreement with the manufacturer, it is allowed to complete the gear motors with agricultural 4A engines...SU1 and other special engines (marine, explosion-proof, DC, low voltage).

CONSTRUCTION, DIMENSIONS AND CONNECTION DIMENSIONS OF THE GEARBOX

Mounting: on paws

Чертеж редуктора 1МПз2-50 (3МП-50) (1MPz2-50 (3MP-50))
type of gear motorfrequency
rotations
output
L
В
Н
L1
L2
B1
В2
H1
Н2
Н3
d
shaft, Rev/minNo more than
1MPЗ-50
18...90
682
270
295
145
210
220
265
132
22
-
22

Mounting: on flanges

Чертеж на мотор-редуктор 1МПз2-50 (3МП-50) (1MPz2-50 (3MP-50)) на фланцах

type of gear motor
the frequency of rotation of the output
L
В
L3
L4
L5
D
D1
D2
d1
n
shaft, Rev/minNo more than
1MPЗ-50
18...90
682
270
8
18
124
250
180
215
17
6

Location options in the space (installation version)

Варианты крепления мотор-редуктора 1МПз2-50 (3МП-50) (1MPz2-50 (3MP-50))

Connecting dimensions of output shafts:

the performance of C – cylindrical:

Цилиндрический вал мотор-редуктора 1МПз2-50 (3МП-50) (1MPz2-50 (3MP-50))

type of gear motor
d
I
b
t
1MPЗ-50
45к6
110
14
48,5

the performance of Kn – conical with an external thread:

Конический вал мотор-редуктора 1МПз2-50 (3МП-50) (1MPz2-50 (3MP-50))

type of gear motor
d
d1
I
I1
b
t
1MPЗ-50
45
М30х2,0
110
82
12
23,45

the performance Hk – hollow keyway:

Полый шпоночный вал мотор-редуктора 1МПз2-50 (3МП-50) (1MPz2-50 (3MP-50))

type of gear motor
d
I
b
t
1MPЗ-50
40Н7
80
12
43,3